• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Image 1
Image 2
Image 3
Image 4
Image 5

QIACHIP 433Mhz RF Receiver Learning Code Decoder Module 433 mhz Wireless 4 CH output For Remote Controls 1527 2262 encoding

R9574.89

2989 in stock

Categories:

Buy With Confidence

100% Safe Payment


;

  • Description

    Description Of Receiver Module:

    Product Model:RX480E-4
    Working Voltage: DC 3V-5V
    Quiescent Current : ≤5mA
    ​Output Current: 10 mA
    Working Frequency: 433MHz
    Receive Sensitivity: -108dB
    Receive Distance: 15 meters above
    Frequency Band: ±0.2MHz
    Working Mode: inching, self-locking, interlocking

    Package List:

    1* RX480E-4 Receiver Module

    About Working mode:

    Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
    Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
    Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.

    Learning the Code:(Momentary)

    Press the learning key on the receiver once time, it comes into momentary setting mode.
    Wait for a moment, the LED will be off , it comes into learning state.
    Push the remote button, LED indicator on the receiver board will flash then come off.
    After 3 seconds, the LED indicator will be on again, learning successfully.

    Learning the Code: (Toggle)

    Press the learning key on the receiver twice time, it comes into toggle setting mode.
    Wait for a moment, the LED will be off , it comes into learning state.
    Press the remote button, LED indicator on the receiver board will flash then come off.
    After 3 seconds, the LED indicator will be on again, learning successfully.

    Learning the Code:( Latching)

    Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
    For example: Button A = ON, Button B = OFF
    Press the learning key on the receiver triple time, it comes into latching mode .
    Wait for a moment, the LED indicator on the receiver board will flash then come off.
    Press the remote button A. LED flash for 5 times.
    Press the remote button B. LED flash for 5 times
    After 3 seconds, the LED indicator will be on again, learning successfully.
    A = ON, B = OFF.

Follow us on:

Please wait...